Basic Functions; Switching On, Switching To Standby; Demonstration Mode; Loading Discs - Philips CDR795 Benutzerhandbuch

Basic functions

Switching on, switching to standby

To switch the set on press 2 STANDBY·ON.
WELCOME TO PHILIPS AUDIO is displayed.
To switch the set to standby press 2 STANDBY·ON
again.
The set is switched to standby.

Demonstration mode

The demonstration mode displays various features of the
set and will start automatically when no key has been
pressed for several minutes or during standby.
To cancel the demonstration mode keep Ç on the
set pressed for at least 5 seconds.
The demo mode is cancelled permanently.

Loading discs

CD player: Press / OPEN/CLOSE to open the CD player
1
drawer.
OPEN CD is displayed and the drawer is opened.
CD recorder: Press / OPEN/CLOSE to open the
CD recorder drawer.
OPEN CDR is displayed and the drawer is opened.
Notes:
Opening the CD player clears any program containing tracks
from a disc loaded in the CD player.
Opening the CD recorder clears any program containing
tracks from a disc loaded in the CD recorder.
2
Insert a disc (printed side up) in the tray.
CD player: Press / OPEN/CLOSE again to close the
3
drawer.
The drawer is closed and READING is displayed.
CD, the total number of tracks and the total playing time
of the disc are displayed.
12
CD recorder: Press / OPEN/CLOSE to close the drawer.
The drawer is closed and READING is displayed.
If an unfinalized disc is loaded, INITIALIZING will be
displayed.
CDR, the total number of tracks and the total playing
time of the disc are displayed.
MP3-CD only:
READING MP3 is displayed.
large number of tracks this could take up to 2 minutes.
The first album name is displayed.

Playback

1
Press É Å either on CD player side or CD recorder side
to start playback.
CD or CDR, the current track number and elapsed playing
time are displayed.
MP3-CD only:
In addition, the track name will also be scrolled.
To switch through the following information press DISPLAY
0 0
repeatedly:
track number, remaining playing time of current track
track number, remaining playing time of disc
track number, elapsed playing time of current track
MP3-CD only:
album number, track number and track name
track number, elapsed playing time of current track
2 Press Ç either on CD player side or CD recorder side to
stop playback.
CD or CDR, the total number of tracks and the total
playing time of the disc are displayed.
MP3-CD only:
The current album name is scrolled.
You can interrupt playback by pressing É Å.
0 0
The time where playback was interrupted will blink.
To resume playback press É Å again.
0 0
3 is shown. Due to the
MP