Manual Recording; Timer Recording - Philips CDR795 Benutzerhandbuch

Manual recording

You can manually start and stop a recording from an
additional appliance.You can use manual recording for
recording live music, or for particular music like classic
which cannot be recorded with automatic start.
1
Insert a CDR(W) which is absolutely free of scratches and
dust particles in the CD recorder tray.
2
Press INPUT repeatedly on the CD player/recorder to
select the input for the additional appliance from which you
want to record.
DIGITAL IN: the digital input is selected.
ANALOG IN: the analogue input is selected.
OPTICAL IN: the optical input is selected.
3
Start playback on the additional appliance.
4
Press REC on the CD player/recorder to enter the
recording menu.
PREPARING is displayed.
RECORD EXT? and PRESS REC are displayed alternately.
5
Press REC on the CD player/recorder to start recording.
Recording starts and
REC
recording time on the CDR(W) is displayed.
6
Press Ç on the CD recorder side to stop recording.
When you press / OPEN/CLOSE on the CD recorder side,
0 0
CD NOT FINAL and PRESS REC TO FINALIZE are
displayed alternately.
Decide now, either
not to finalize: the CDR is not ready to play on other
CD players, however, other tracks or CD text can still
be added.
Press / OPEN/CLOSE on the CD recorder side again or
wait a few seconds.
The drawer is opened.The CDR(W) is not finalized.
or
to finalize: the CDR is ready to play on other
CD players, however, no other tracks or CD text can
be added.
Press REC on the set to start finalizing.
FINAL is displayed and the actual finalizing time
remaining will start to count down.
is shown.The remaining
External recording

Timer recording

This feature allows you to start a time restricted recording
via the analogue input (e.g. for recordings from a tuner).You
can choose a recording of 15, 30, 45 or 60 minutes or to
the end of the CDR(W).
1
Insert a CDR(W) which is absolutely free of scratches and
dust particles in the CD recorder tray.
2
Make sure the additional appliance from which you want to
record is connected properly.
3
Press TIMER REC on the remote control to start recording.
15 MIN, followed by PREPARING, is displayed.
Recording starts and
REC
time left is displayed.
To select another recording time press TIMER REC on the
0 0
remote control repeatedly until the desired time is displayed:
30 MIN, 45 MIN, 60 MIN, MAXIMUM is displayed.
4
After the chosen time has elapsed, recording stops
automatically and the set switches to standby.
To stop recording manually press Ç on the CD recorder
0 0
side.
is shown.The actual recording
19