Clearaudio Magnify Tonarm ohne VTA – Lifter Bedienungsanleitung Seite 7

Magnify
2.2 - tonearm without VTA-Lifter:
1.)
Tighten the mounting plate for the
tonearm base. Please take the delivered screws.
Feed the tonearm cable through the mounting plate and slide the tonearm feet through the
drilling of the mounting plate.
Pic. 7: Placing the tonearm
2.)
To adjust the pivot of the tonearm Clearaudio
recommends the clearaudio IEC alignment gauge
(Art. No.: AC005 / IEC; also available at
www.analogshop.de).
Make sure that the distance from the spindle to
the pivot point (center) of the tonearm is exact
222 mm.
When moving the armboard in one or another
direction you can set the correct distance. After
distance is adjusted, tighten the screw of the
armboard.
Seite/Page 7
Pic. 6
Magnify -
tonearm with the screws onto the mounted
Pic. 8 Distance from spindle to the pivot (222 mm)
Magnify
User manual / Bedienungsanleitung
Magnify
tonearm without VTA-Lifter
 clearaudio electronic GmbH 2014
222 mm