Clearaudio Magnify Tonarm ohne VTA – Lifter Bedienungsanleitung Seite 6

Magnify
User manual / Bedienungsanleitung
2.)
To adjust the distance of the tonearm Clearaudio recommends the clearaudio IEC
alignment gauge (Art. No.: AC005 / IEC; also available at www.analogshop.de).
Make sure that the distance from the spindle to the pivot point (center) of the tonearm is
exact 222 mm. When moving the armboard in one or another direction you can set the
correct distance. After distance is adjusted, tighten the screw of the armboard.
222 mm
Pic. 5 Distance from spindle to the pivot (222 mm)
Adjustment of the tonearm height with VTA – Lifter:
Please follow hereby the user manual of the VTA – Lifter.
The height of the tonearm ist adjusted correct, if the upper side of the mounted cartridge is
parallel to the surface of the record (when the cartridge is lifted down).
Seite/Page 6  clearaudio electronic GmbH 2014