Eufab 16474 Gebrauchsanleitung Seite 5

• For your own safety, only use accessories and spare parts that are stated in these instructions or that are recommended by the
manufacturer!
• Position the charger in your vehicle in such a way that, when driving the vehicle, you are not hindered by the charger and the
devices connected to it.
• When inserting the charger into a cup holder in the vehicle, you must ensure that at least half of the ventilation
slot remains free. The device may otherwise overheat. This causes a risk of fi re.
• The charger and the devices connected to it must be secured fi rmly during the journey.
• When you have parked your vehicle, always pull the connection cable of the charger out of the socket of the
cigarette lighter. There is a risk that the battery of your vehicle may be discharged.
5. Explanation of symbols
6. Operating instructions
6.1 Overview
Figure 2: Ventilation mesh
6.2 Connecting the charger
Remove all devices connected to the charger. Insert the plug (Position 1 in the overview) into the 12 V socket of your vehicle.
Depending on the type of vehicle, you may need to switch the vehicle on in order to ensure that the 12 V socket is supplied with
power.
6.3 Connecting consumers to the charger
Once you have connected the charger to the socket of your vehicle, you can connect up to four USB devices and a maximum of
two devices with 12 V vehicle connectors.
The charger is able to supply a maximum overall power of 7.2 A to the USB outputs. The overall power is limited to 6A at the 12
V sockets.
Pay attention to these values if you have connected multiple devices to the charger. The charging currents are re-
duced, for example, for the USB outputs and the charging times for the individual devices are extended.
1 Vehicle connector, connection plug to cigarette lighter socket
2 Charge status display for vehicle battery
3 USB connections
4 12 V sockets
5 Connection cable
Figure 1: View from above
6 Ventilation mesh
Figure 3: Charge status display
5