Explanation Of Symbols; Intended Use; Scope Of Delivery - VOLTCRAFT LSP-1165 Bedienungsanleitung

2. EXPLANATION OF SYMBOLS

This symbol is used when your health is at risk, e.g. from an electric shock.
The exclamation mark in a triangle indicates important notes in these operating instructions that must be
observed strictly.
The "arrow" symbol indicates that special advice and notes on operation are provided.
The product is intended for use in dry indoor rooms only; it must not become damp or wet.
Observe the operating instructions!

3. INTENDED USE

The lab mains unit with electronic stabilisation serves as a potential-free voltage source to operate low-voltage
consumers.
The output voltage and the output current can be set via a rotary encoder each (for setting area, see chapter "Tech-
nical data"). A display shows the output voltage and the output current. The direct voltage output of the lab mains
unit is available at two 4 mm sockets on the front.
The lab mains unit is set up in protection class I and must only be connected and operated at a protective contact
mains socket of the public mains.
The power intake of the consumer must not exceed the rated current of the mains unit (see chapter "Technical
data").
The safety notes and all other information in these operating instructions always have to be observed. Read the
operating instructions precisely and keep them. Only pass the product on to any third parties together with the
operating instructions.
This product complies with the statutory national and European requirements.

4. SCOPE OF DELIVERY

• Lab mains unit
• Mains cable
• Operating instructions
18