Herunterladen Inhalt Inhalt Diese Seite drucken

Wireless Transmission Control; Wireless Siren Coding Encryption; Time Setting Of Out Arm Delay; Time Setting Of Alarm Delay - mt vision AS-200 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Function settings
12. Wireless Transmission
In setup status, use keypad to input 41, then input the number 1/0, and then input #
to confirm. You will hear a long beep and a voice prompt "setting completed". The
factory default is off.
Operating method: 41 a 0/1 a #
0: turn off the function of wireless transmission
1: turn on the function of wireless transmission
For example: turn on the function of wireless transmission
Operating method: 41 a 1 a #
Note:
After activating this function, do as follows to set the wireless siren with the
main unit. Input 411#, and then make the siren you want to set into coding
status, finally press 0# on the panel. Pressing 0# means the panel will make
coding signal to the siren, this signal will last for 3 seconds. So please make
sure the siren is in coding status during this 3-second period.

13. Wireless Siren Coding Encryption

In setup status, use keypad to input 43, then input the number 0001~9999, and then
input # to confirm. You will hear a long beep and a voice prompt "setting completed".
Operating method: 43 a A a#
A indicates: the code number 01~99
For example: set the wireless coding number as 10
Operating method: 43 a 10 a#
14. Time Setting of Out Arm Delay (Default: 60 sec)
In setup status, use keypad to input 44, then input delay time 01~99, and then input
[#] to confirm. You will hear a long beep and a voice prompt "setting completed".
Operating method: 44 a AA a #
AA indicates: the alarm delay time 01~99 seconds
For example: set the wireless coding number as 99
Operating method: 44 a 99 a #
ENGLISH
12
Function settings
Note:
The setting is effective only with the panel keyboard operation. The operation
by remote controller or SMS is immediate arm without delay.
15. Time Setting of Alarm Delay (Default: 40 sec)
In setup status, use keypad to input 45, then input delay time 01~99, and then input #
to confirm. You will hear a long beep and a voice prompt "setting completed".
Operating method: 45 a AA a #
AA indicates: the code number 01~99
For example: set the wireless coding number as 65
Operating method: 45 a 65 a #
Note:
Alarm delay is effective only when the correspondent zone of the detector is
set as alarm delay zone.

16. Alarm Number Setting

In setup state, input 51~56, then input the voice alarm-receiving number (mobile num-
ber or telephone number), and then press # to confirm. The main unit will make a
long beep, the Signal indicator will flicker once, and you will hear "setting completed",
which indicate voice alarm-receiving number is set successfully.
Operating method: XX a YY...YY a #
XX indicates: the 1- 6 alarming user number 51~56
YY...YY indicates: voice alarm-receiving phone number
For example: set 13811111111 as the first voice call number
Operating method: 51 a 13811111111 a #
Note:
The alarm-receiving number can be maximum 15 digits.
ENGLISH
13

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis