Clock Setting; Timing Settings; Timely Arm; Timely Disarm - mt vision AS-200 Bedienungsanleitung

Function settings

10. Clock Setting

In setup status, use keypad to input 32, then input the last 2 digits AA of the present
year, the two digits BB of the month, the two digits CC of the date, the two digits
DD of the hour (24-hour system), the two digits EE of the minute, the two digits FF
of the second, and finally enter # to confirm. You will hear a long beep and a voice
prompt "setting completed".
Operating method: 32 a AA a BB a CC a DD a EE a FF a #
AA indicates: the last 2 digits of the present year
BB indicates: the 2 digits of the present month
CC indicates: the 2 digits of the present date
DD indicates: the 2 digits of the present hour
EE indicates: the 2 digits of the present minute
FF indicates: the 2 digits of the present second
For example: set the time as 15:35:40, Oct. 1st, 2009
Operating method: 32 a 09 a 10 a 01 a 15 a 35 a 40 a #

11. Timing Settings

Timely Arm

In setup status, use keypad to input 33~35, then input the hour AA and minute BB
of the time you want to set to arm, and finally input # to confirm. You will hear a long
beep and a voice prompt "setting completed".
Operating method: XX a AA a BB a #
XX indicates: the address code 33, 34, 35 of the timely arming
AA indicates: the hour of the setting time
BB indicates: the minute of the setting time
For example: set the arm time as 10:45pm
Operating method: 33 a 22 a 45 a #
ENGLISH
10
Function settings

Timely Disarm

In setup status, use keypad to input 36~38, then input the hour AA and minute BB
of the time you want to set to disarm, and finally input # to confirm. You will hear a
long beep and a voice prompt "setting completed".
Operating method: XX a AA a BB a #
XX indicates: the address code 36, 37, 38 of the timely disarming
AA indicates: the hour of the setting time
BB indicates: the minute of the setting time
For example: set the arm time as 7:55am
Operating method: 36 a 07 a 55 a #

Timing Control

In setup status, use keypad to input 39, then input the number indicating turning on
timely arm/ disarm 1/0, and then input # to confirm. You will hear a long beep and a
voice prompt "setting completed". The factory default is off.
Operating method: 39 a 0/1 a #
0: turn off the function of timely arm/ disarm
1: turn on the function of timely arm/ disarm
For example: turn on the function of timely arm/ disarm
Operating method: 39 a 1 a #
Note:
If turning on timely arm/disarm function, the clock icon will display on the
screen. If turn off the function, the icon will not display.
ENGLISH
11