Intended Use - VOLTCRAFT PLC3000 Bedienungsanleitung

3. INTENDED USE

The energy costs meter is intended for measuring and analysing
consumption data of electric products. The meter is to be installed between
wall socket and electric appliance and is controlled via an app (application)
downloaded from the Internet. The device must only be used with a normal
isolated ground receptacle in your home featuring a rated voltage of
230 V/AC 50Hz (D/FR/CH), 220 - 240 V/AC 50 Hz (UK). The max.
nominal power of the resistive load may not exceed 3680 watts (D/FR),
3120 watts (UK), 2300 watts (CH). The max. nominal power of the inductive
load may not exceed 1150 W (230 V/AC, 5 A).
You may enter the current electricity rate for cost calculation purposes. The
device can further generate a cost forecast per day, week, month or year.
You may display and adjust the consumption data on your mobile device.
The meter has not been calibrated officially and hence must not be used for
billing purposes.
This product fulfils European and national requirements related to
electromagnetic compatibility (EMC). CE conformity has been verified
and the relevant statements and documents have been deposited at the
manufacturer.
It is intended for indoor use only. Do not use it outdoors. Contact with
moisture, e.g. in bathrooms, must be avoided under all circumstances.
This product complies with the statutory, national and European
requirements.
For safety and approval purposes (CE), you must not rebuild and/or modify
this product. If you use the product for purposes other than those described
above, the product may be damaged. In addition, improper use can
cause hazards such as short circuiting, fire, electric shock etc. Read the
instructions carefully and keep them for future reference. Make this product
available to third parties only together with its operating instructions.
25