General Notes - Endress+Hauser Micropilot FMR50 Sicherheitshandbuch

Micropilot

General notes

!
Unless otherwise indicated, the positions always refer to the basic specification.
Note!
Observe the permitted temperature range at the antenna.
1
* = Functional
Max. permissible process temperature
Selection table
Operation mode: Ex i
Position 1, 2 (Approval)
B4 ATEX: II 1/2 G Ex ia IIC T6-T1 Ga/Gb
ATEX: II 1/2 G Ex d [ia] IIC T6-T1 Ga/Gb
I4 IECEx: Ex ia IIC T6-T1 Ga/Gb
IECEx: Ex d [ia] IIC T6-T1 Ga/Gb
Position 3 (Power Supply; Output)
E 2-wire, FOUNDATION Fieldbus, switch output (PFS)
G 2-wire, PROFIBUS PA, switch output (PFS)
Operation mode: Ex d
Position 1, 2 (Approval)
B4 ATEX: II 1/2 G Ex ia IIC T6-T1 Ga/Gb
ATEX: II 1/2 G Ex d [ia] IIC T6-T1 Ga/Gb
I4 IECEx: Ex ia IIC T6-T1 Ga/Gb
IECEx: Ex d [ia] IIC T6-T1 Ga/Gb
Position 3 (Power Supply; Output)
E 2-wire, FOUNDATION Fieldbus, switch output (PFS)
G 2-wire, PROFIBUS PA, switch output (PFS)
Position 5 (Housing)
B GT18 dual compartment, 316L
C GT20 dual compartment, Alu coated
Transmission code of the
terminal module
TRC [26]
Position 5 (Housing)
B GT18 dual compartment, 316L
C GT20 dual compartment, Alu coated
Transmission code of the
terminal module
TRC [27]
XA00689F-A
Channels
1 or 2 channels
used
Channels
1 or 2 channels
used
37