Operating Components; Preparation; Analogue Clock - Silvercrest SKIU 5 A1 Bedienungsanleitung

Operating components

(see fold-out page)
Figure A:

Analogue clock

UNIT button
Display
TARE button
Figure B:
Hanger
Time adjustment wheel
"Clock" battery compartment
"Scale" battery compartment

Preparation

Analogue clock
1) Remove the plastic strip from the "Clock" battery compartment
2) Turn the time adjustment wheel
NOTES ON CHANGING THE BATTERY
► Insert only one button-cell battery (type LR44).
► To open the "Clock" battery compartment
anticlockwise a little way using a thin coin. The arrow on the battery com-
partment cover must point to the arrow behind OPEN next to the battery
compartment.
► Remove the cover and take out the old battery.
► Insert a new battery. Pay attention to the correct polarity: the "+" pole must
be facing upwards.
► Place the cover on the "Clock" battery compartment
on the cover points to the arrow behind OPEN next to the "Clock" battery
compartment
tion until the arrow on the battery compartment cover points towards the
arrow in front of the word CLOSE.
The "Clock" battery compartment
GB │ MT
■ 18 │
until the correct time is displayed.
. Turn the battery compartment cover in a clockwise direc-
is now closed.
.
, turn the cover of the battery
so that the arrow
SKIU 5 A1