How To Connect The Underwater Flash; Connecting The Underwater Optical Fiber Cable - Olympus PT-EP11 Bedienungsanleitung

4. How to connect the underwater flash

Connecting the underwater optical fiber cable

To connect the UFL-2 underwater flash (optional) to the Case using an underwater optical fiber cable
(optional: PTCB-E02), follow the procedures below.
(Install the flash supplied with the camera.)
How to connect the underwater optical fiber cable
Put the underwater optical fiber cable plug all the way into the
optical cable insertion slot until the black axis of the connector
is hidden.
Setting of the digital camera
Set the RC mode of the camera to ON so that the camera's built-in flash is activated.
In case of UFL-2, set the flash to RC mode.
For details, refer to the instruction manual of UFL-2.
In case of UFL-1, plug the optical fiber cable in the same way.
EN
Turn the RC mode of the camera to OFF.
EN 16