Herunterladen Inhalt Inhalt Diese Seite drucken

Used Batteries; Assembling Instructions; Operation - FLORABEST FAT 18 B2 Betriebsanleitung

Vorschau ausblenden Andere Handbücher für FAT 18 B2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

GB

Used batteries

If a fully recharged battery lasts for
considerably shorter operating times,
the battery is used up and needs to be
replaced. Only use an OEM battery
pack replacement available from our
Customer Service.
Always take heed of the applicable
safety instructions as well as the envi-
ronmental protection regulations and
information (see "Cleaning and Main-
tenance").

Assembling instructions

Do not insert the battery until
the appliance is fully assem-
bled. Risk of injury!
To put together the equip-
ment:
1. Turn the black twist lock (24) on
the motor head (10) until the
notches match up to those in the
green casing. Lock open symbol 
.
2. When plugging in the telescopic
tube (9) be aware of the different
plastic pin thicknesses on the
tube. Only one position is possi-
ble.
3. Plug the end of the telescopic
tube (9) all the way into opening
on the motor head (10). If the
position is correct, the cross-head
screw on the pipe is no longer
visible.
4. To lock, turn the twist lock (24)
approx.45º clockwise. Lock closed
symbol 
34
.
To put on the protective
cover:
1. Place the protective cover (14) on
the motor head (10) and screw it
down with the 3 Phillips screws.
To put on the auxiliary
handle:
2. Pull the ends of the auxiliary han-
dle (5) to extend the handle and
slide it over the handle holder
(22).
3. Screw down the screw (23) in the
auxiliary handle (5).
Mounting the trimming unit:
4. Slip the cutting disc (12) onto the
axle. There is only one mount-
ing position. Screw the cutting
disc (12) to the axle. Mind the
left-hand thread. Please ensure
that the screws are properly tight-
ened.
Place the cutting insert (13) on
the pin (23) on the cutting disk
(12) and pull out the insert until it
snaps in.
Spare cutting inserts are kept in the
box (4) on the auxiliary handle (5).
To insert the battery:
5. To insert the battery (16), place it
on the guide track (20) and push
it into the appliance. It will audi-
bly snap in.

Operation

Caution: risk of injury! Do not
operate the appliance with-
out the protective cover. To
operate the appliance, wear
suitable clothing, eye and ear

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis