Troubleshooting - Silvercrest SWK 360 A1 Bedienungsanleitung Und Sicherheitshinweise

Troubleshooting

The following table will help you to rectify minor problems:
Fault
The camera will not switch on.
The video has no sound.
The image is too bright/dark.
The image has spots and stripes.
There is no connection between the
camera and the smartphone.
The camera is unresponsive when
you press any of the buttons on the
remote control. But the operating
LED flashes when doing so.
The camera is unresponsive when
you press any of the buttons on
the remote control. The operating LED
does not flash when doing so.
There are picture errors on the
videos/photos.
The inserted microSDHC memory
card is not compatible.
SWK 360 A1
Remedy
► Charge the battery
► In the settings, select the video mode with sound
recording and activate this.
► Choose "Exposure" menu in the function settings. The
negative values help to compensate for overexposure,
the positive values for underexposure.
► Clean the lens as described in the section Cleaning.
► Proceed as described in the section Connecting the
camera to a smartphone via Wi-Fi.
► You are out of range of the camera. Move the remote
control nearer to the camera until the camera
reacts.
► The battery in the remote control is empty. Change the
batteries as described in the section Using the remote
control.
► Use a microSDHC card with a speed rating of 10.
Using memory cards with a speed rating of less than
10 can lead to picture errors during the capture.
► Format the inserted microSDHC memory card as
described in the section System configuration.
or use the replacement battery
GB│IE│NI
.
49 ■
│