Arm mount
You will need the following accessories to install the arm mount
♦
Undo the screw cap on the arm mount
♦
Push the ball joint on the ball adapter
♦
Re-tighten the screw cap on the arm mount
♦
Place the thread
tight.
♦
Press the Velcro fastener on the strap firmly at the suitable locations.
♦
Fasten the arm mount
♦
Adjust the Velcro of the strap so that camera is firmly in position.
NOTE
►
To adjust the camera, undo the screw cap and move the camera into the required position.
Then re-tighten the screw cap on the arm mount
■
42
GB│IE│NI
│
.
into the screw cap on the arm mount
on the camera onto the fixture of the ball adapter
on your arm.
:
+
+
.
.
.
and screw the camera
SWK 360 A1