Troubleshooting - Silvercrest SCAW 5.00 B2 Bedienungsanleitung Und Serviceinformationen

Troubleshooting

You can solve most common problems yourself using the table below. If the problem persists
after checking the suggested solutions, please contact our Service Hotline (see page 91). Do
not attempt to repair the product yourself.
Problem
Unable to power the
camcorder on.
The camcorder suddenly
powers off.
The camcorder suddenly
powers off.
The camcorder fails to respond
and cannot be switched off.
Unable to disable motion
detect.
Solution
The battery pack is empty. Recharge the battery.
The battery pack is empty. Recharge the battery.
Auto power off is enabled. Check the settings (see
page 48).
Remove the battery pack for a few seconds and re-
insert it.
The device is still recording. First stop recording by
pressing the Recording button (7) and then press the
Menu button (14). (See page 60).
SilverCrest SCAW 5.00 B2
English - 87