Transferring/Playing Back Captures On A Computer - Silvercrest SWK 360 A1 Bedienungsanleitung Und Sicherheitshinweise

Transferring/playing back captures on a computer

You can play/transfer your captures onto a computer in two different ways.
Using a USB cable
♦ Remove the side compartment cover
side compartment cover).
♦ Connect the USB plug on the USB cable
♦ Connect the micro-USB plug on the USB cable
The camera switches on automatically (if not already switched on).
♦ USB mode is selected. Confirm USB mode with the
camera's display.
Your computer detects the memory card in the device as a "Removable Disk" and automatically
installs the necessary drivers. Afterwards, you can use your file explorer to display the contents of
the microSDHC memory card
♦ Disconnect the USB cable
Using an adapter card
♦ Insert the microSD memory card
♦ Insert the adapter card (microSD to SD)
Your computer detects the memory card as a "Removable Disk" and automatically installs the nec-
essary drivers. Afterwards, you can use your file explorer to display the contents of the microSDHC
memory card
NOTE
► The adapter card (microSD to SD)
card from write access, slide the switch on the side of the card downwards (see figure 12).
► The write-protect switch only protects the microSDHC memory card
adapter card (microSD to SD)
the write protection will no longer be available.
SWK 360 A1
. Now carry out the required file operations.
from the camera to exit USB mode.
. Now carry out the required file operations.
. As soon as you remove the microSDHC memory card
Fig. 11
from the camera (see section Removing/attaching the
to a powered-on PC.
to the micro-USB port ( )
OK button. The
in the adapter card (microSD to SD)
into a computer with an SD card slot.
has a write-protect lock. To protect the microSDHC
Fig. 12
on the camera.
icon appears on the
(see figure 11).
as long as it is in the
,
GB│IE│NI 27
│
■