Herunterladen Inhalt Inhalt Diese Seite drucken

Silvercrest SEMS 12 A1 Bedienungsanleitung Seite 12

Elektrischer messerschaerfer
Vorschau ausblenden Andere Handbücher für SEMS 12 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

NOTE
Use both slits of sharpening bases
even sharpening.
3) Hold the knife at the handle and now pull the blade in a steady movement
through the left and through the right slit of sharpening base 2
If necessary, pull the blade multiple times through both slits of sharpening
base 2
Normally, it is sufficient to pull the blade 2 times slowly (approx. 4 - 6 seconds)
and 2 times quickly (approx. 1 - 2 seconds) through both slits of sharpening
base 2
NOTE
Very dull knives might have to be pulled through more than once.
4) If you believe that the blade has reached the desired sharpness, test it on
a piece of cutting matter.
Be sure to clean the blade again before you might possibly re-sharpen it.
5) To re-sharpen the blade, pull it once more through the slits of sharpening
base 2
6) If you are satisfied with the result, turn the appliance off on the On/Off
switch
7) Clean the blade thoroughly before you use the knife again, in order to
remove potential grinding residues such as metal dust or chips.
SEMS 12 A1
.
:
in alternation, until the desired sharpness is reached.
.
/
equally frequently to achieve
GB
IE
in alternation.
9

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis