Cleaning - Silvercrest SEMS 12 A1 Bedienungsanleitung

NOTE
► Very dull knives might have to be pulled through more than once.
3) If you believe that the blade has reached the desired sharpness, test it on a
piece of cutting matter.
Be sure to clean the blade again before you might possibly re-sharpen it.
4) To re-sharpen the blade, pull it once more through the slit of sharpening base
2
5) If you are satisfied with the result, turn the appliance off on the On/Off
switch
6) Clean the blade thoroughly before you use the knife again, in order to
remove potential grinding residues such as metal dust or chips.

Cleaning

RISK OF ELECTRIC SHOCK
► First, pull out the mains adapter
from socket
CAUTION – PROPERTY DAMAGE!
► Do not use aggressive or abrasive cleaning agents. These can damage the
surfaces of the appliance.
SEMS 12 A1
, until the desired sharpness is reached.
.
, before you clean the appliance.
NEVER submerse the appliance in water or other liquids!
Otherwise there is a risk of an electric shock.
or
from the socket and pull out plug
GB
IE
11