Silvercrest KH 2376 Bedienungsanleitung Seite 73

Troubleshooting
Defect
The radio and/
or the automatic
station saving is
not functioning
Station memory is
not functioning
The device's USB port
does not function
The card reading
device does not read
the cards
The Bluetooth connec-
tion does not function
NOTICE
► If you cannot solve the problem with the aforementioned methods please
contact customer service.
Bluetooth Car Radio KH 2376
Possible cause
The antenna cable is not
connected correctly.
The station signals are
too weak.
The connection 4 in the
ISO block A (Permanent
positive) is not connected
correctly.
The USB port is intended
for devices that function
according to the USB
standard. Not all market
available devices con-
form to this standard. It is
possible that a device is
connected that does not
function according to the
USB standard.
The card is possibly
defective, dirty or not
properly inserted.
The mobile telephone
does not support
Bluetooth transmissions.
The mobile telephone is
not coupled with
the device.
Solution
Check the antenna cable for correct
connection.
Set the station manually.
Check the cable connections. For this
consult the chapter "Connections".
Connect a device that functions ac-
cording to the USB standard. Make
sure that the data carrier is formatted
for the FAT32 fi le system.
Check the card. Slide it in with the in-
scribed side facing to the right. Make
sure that the data carrier is formatted
for the FAT32 fi le system.
Reconnect the mobile telephone
and the device. For this also read,
without fail, your mobile telephone's
instructions.
GB
75