Unpacking The Appliance; Overview Of The Components / Scope Of Delivery; Electrical Connection; Functionality Of The Appliance - Profi Cook PC-KM 1151 Bedienungsanleitung

Unpacking the Appliance

1. Remove the appliance from the package.
2. Remove all packaging material such as films, filler, cable
holders and cardboard.
3. Check the delivery contents for completeness.
4. Should the package contents be incomplete or damages
be found, do not take the appliance into operation. Take
it immediately back to the dealer.
NOTE:
Dust or production residues can be located on the appli-
ance. We recommend to clean the appliance as described
under "Cleaning".
Overview of the Components /
Scope of Delivery
Page 3
1 Cover for meat grinder engine
2 Release button for meat grinder attachment
3 Swivel arm
4 Knob ( – )
5 Power indicator light
6 Release button for lowering / raising the arm
7 Motor housing
8 Mixing bowl
9 Splash guard
10 Meat grinder with filling tray and darner
11 Whisk
12 Stirring hook
13 Dough hook
Page 4: Assembly of the Meat Grinder
14 Pusher (with storage compartment for the accessories)
15 Filler tray
16 Worm housing filler neck
17 Spiral
18 Knife
19 3 sieves (fine, medium, coarse)
20 Locking ring
21 Dough divider
22 Sausage attachment
23 2­part attachment "Kebbe"
24 Biscuits attachment
25 Biscuits cutter form

Electrical Connection

Check whether the power supply that you want to use
coincides with that of the appliance. The information can be
found on the nameplate.
48
PC-KM1151_IM

Functionality of the Appliance

Protective Features

• The appliance is equipped with a circuit breaker. The ap­
pliance can only be operated if the following is observed:
- the swivel arm is locked in place in the lowest position.
• The electronic speed regulation prohibits a motor drive
overload automatically. The revolutions per minute are
automatically regulated in the case of an overload.

Turning the Appliance On

• After you have connected the appliance to the power
supply, and if the circuit breaker on the swivelling arm is
closed, the power indicator light will light up.
• Turn the rotary knob clockwise to select the desired
speed level. The appliance starts to operate. If you do
not turn off the appliance, it will turn itself off automati-
cally after an operation time of 10 minutes. Afterwards
set the knob into position.
• Pulse operation: Turn the knob counter­clockwise to
the position. Hold the knob in this position only for a
short time.

Turning the Appliance Off

1. Set the knob into position to turn the appliance off.
2. Disconnect the mains plug from the socket.

The Kneading Machine

Installation and Operation of the Kneading Machine

If you have used the meat grinder previously, cover the
drive shaft of the spiral housing with the cover.
1. Open the swivel arm: Push the swivelling arm down-
ward. Press the release button (6). Move the arm by
hand to the highest position.
2. If you need the splash guard, attach it now to the swivel
arm from below. Hold the splash guard (9) in such a way
that the fill opening is positioned in front of you. The
symbol and the marker on the swivelling arm must be
aligned with one another. Turn the splash guard towards
to lock it.
3. Attaching accessories:
On the top end of the accesso-
ries, there is a recess for the
drive shaft and the splint. Slide
the accessory over the drive
shaft. Push down and at the
same time turn the accessory
anticlockwise in order for the splint of the drive shaft to
lock into the accessory.
4. Mixing bowl: Place the mixing bowl into its holder. Turn
the bowl towards to its limit.
5. Fill your ingredients into the mixing bowl.
19.12.17