Accessories; Rigging Techniques - WARN PullzAll Installations- Und Bedienungsanleitung

Snatch Block: Used properly, the
The PullzAll is a convenient
multi-purpose snatch block allows
handheld pulling tool. Some of the
you to: (1) increase your PullzAll's
following accessories are vital to
pulling power, and (2) change your
the safe operation of the PullzAll,
pulling direction without damaging
while others offer added versatility
the wire rope. Proper use of the
and convenience.
snatch block is covered in the

"Rigging Techniques".

Gloves: Wire rope, through use,
will develop "barbs" which can
slice skin. It is extremely important
to wear protective gloves while
operating the PullzAll or handling
the wire rope. Avoid loose fi tting
clothes or anything that could
become entangled in the wire rope
and other moving parts.
Clevis/D-Shackles: The
D-Shackle is a safe means for
connecting the looped ends of
straps and snatch blocks. The
shackle's pin is threaded to allow
Hook Strap: Used to hold the
hook and keep fi ngers away from
the fairlead as the rope is being
spooled in and out. Pulling tools
develop tremendous forces and
easy removal.
can easily remove fi ngers and
limbs that are placed in pinch
Strap: Typically made of tough,
points. Put the hook into the loop
high-quality nylon, it provides the
and hold the strap between the
operator an attachment method for
thumb and forefi ngers.
connecting the PullzAll wire rope to
a load or anchoring point.
Choker Chain: Can be used to
hook-up a load.
for the PullzAll. Contact Warn
customer service to learn more.
WARN INDUSTRIES * THE BASIC GUIDE TO UTILITY PULLING

ACCESSORIES

CAUTION
Never attach a
recovery strap to
the PullzAll hook
to increase the
length of a pull.
Never use
bungee straps
that develop
tremendous
and potentially
dangerous
amounts of force
when stretched.
Accessory kits are available
19
RIGGING TECHNIQUES
Various pulling situations will
require application of other pulling
techniques. These could range
from too little distance to achieve
maximum pull/lift using straight line
rigging, increasing pulling power, or
WARNING
maintaining a straight line pulling
Never spool out situation. You will have to assess
past red paint on what technique is correct for you
wire rope.
situation. Think "safety" at all times.
Think through each situation before
you act.
Increasing Pulling Power &
Duration
In some cases, you may fi nd
yourself needing more pulling
power. The use of snatch blocks
increases mechanical advantage
and increases your pulling power:
Pallet Pulling Example:
Single line
WARNING
Never use pulling
Double line
tool to lift or move
persons.
Never use pulling
Double Line
tool to lift over
Because pulling power
persons.
decreases with the number of
layers of rope on the PullzAll drum,
you can use a snatch block to
double line out more rope. This
decreases the number of layers of
rope on the drum, and increases
pulling power.
WARN INDUSTRIES * THE BASIC GUIDE TO UTILITY PULLING
Start by spooling out the wire
rope. Attach the hook to an anchor
and run the rope through a snatch
block.
Using the snatch block, spool
out enough wire rope to reach your
load point. DO NOT spool out past
the red wire rope. Doing so can
cause the wire rope to spool on the
drum in the wrong direction. This
can damage wire rope and fairlead.
Secure to the load point with
a strap or choker chain. Attach the
clevis/shackle. Attach the shackle
to the two ends of the strap/chain,
being careful not to over tighten
(tighten and back-off 1/2 turn).
Lifting
Anchor the PullzAll so that it
is offset and not inline with object
to be lifted. Do not attempt to lift an
off-center load, this can cause the
load to swing dangerously. Never
allow the load to swing or twist.
20