Bosch GCM 10 S Professional Originalbetriebsanleitung Seite 25

OBJ_BUCH-1126-003.book Page 25 Friday, March 1, 2013 3:51 PM
48 Indicator for bevel angle
49 Screws for insert plate
50 Lock nuts of the depth stop
51 Depth stop
Technical Data
Sliding Mitre Saw
Article number
0 601 B20...
Rated power input
No-load speed
Weight according to EPTA-Procedure
01/2003
Protection class
Dimension of suitable saw blades
Saw blade diameter
Blade body thickness
Mounting hole diameter
Permissible workpiece dimensions (maximal/minimal) see page 28.
Starting cycles generate brief voltage drops. Interference with other equipment/machines may occur in case of unfavourable mains system conditions.
Malfunctions are not to be expected for system impedances below 0,15 ohm.
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Noise/Vibration Information
Measured sound values determined according to EN 61029.
Typically the A-weighted noise levels of the product are:
Sound pressure level 94 dB(A); Sound power level
105 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 61029:
2 2
a <2.5 m/s , K=1.5 m/s .
h
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 61029 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Bosch Power Tools
52 Material stop*
53 Screw for bevel angle indicator
54 Scale for bevel angle
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
... 503
... 508
... 532
... 542 ... 514
W 1800 1500
-1
min 4600 5000
kg 21.5 21.5
/II /II
mm 254 254
mm 1.4 –2.5 1.4 –2.5
mm 30 30
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 61029
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 01.03.2013
Assembly
 Avoid unintentional starting of the machine. During as-
sembly and for all work on the machine, the power plug
must not be connected to the mains supply.
Delivery Scope
Carefully remove all parts included in the delivery from their
packaging.
Remove all packaging material from the machine and the ac-
cessories provided.
... 534 ... 537 ... 541
1650 1800 1500
4700 4700 4300
21.5 21.5 21.5
/II /II /II
254 254 254
1.4 –2.5 1.4 –2.5 1.4 –2.5
16 25.4 30
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
1 609 92A 08Z | (1.3.13)
English | 25
GCM 10 S
... 550
1800
4600
21.5
/II
254
1.4 –2.5
25.4