Stopping Your Product; Vacation Function - Blomberg DSM 9850 T A+ Bedienungsanleitung

Defrost twice a year or when a frost
layer of around 7 (1/4") mm has formed.
To start the defrosting procedure,
switch off the appliance at the socket
outlet and pull out the mains plug.
All food should be wrapped in several
layers of newspaper and stored in a
cool place (e.g. fridge or larder).
Containers of warm water may be
placed carefully in the freezer to speed
up the defrosting.
Do not use pointed or sharp-edged
objects, such as knives or forks to
remove the frost.
Never use hair dryers, electrical
heaters or other
appliances for defrosting.
Sponge out
collected in the bottom of the freezer
compartment. After defrosting, dry the
interior thoroughly.
Insert the plug into the wall socket and
switch on the electricity supply.

Stopping your product

If your thermostat is equipped with
"0" position:
- Your product will stop operating
when you turn the thermostat button to
"0" (zero) position. Your product will not
start unless to you turn the thermostat
button to position "1" or one of the
other positions again.
If your thermostat is equipped with
"min" position:
.Unplug your product to stop it -
such electrical
the defrost water

Vacation Function

If the doors of the product are
not opened for 12 hours after the
thermostat is switched to the hottest
position, then the vacation function will
be activated automatically.
Open the door of the product or
change the thermostat setting to cancel
the function.
Vacation function is optional. It may
vary depending on the product type
and may not be contained in every
product.
It is not recommended to store food in
cooler compartment when the vacation
function is active.
C Figures that take place in this
instruction manual are schematic
and may not correspond exactly with
your product. If the subject parts are
not included in the product you have
purchased, then it is valid for other
models.
16
EN