Stopping Your Product; Crisper Humidity Control Sliders - Blomberg DSM 9650 A+ Bedienungsanleitung

• Remove the water that accumulates
in the lower container of the freezer
compartment with an absorbent cloth
or sponge.
• Dry the freezer compartment
completely and return the
temperature setting button to its
previous position.
• Operate your refrigerator for 2 hours
while it is empty and its doors are
closed before replacing your food into
the deep freezer.

Stopping your product

If your thermostat is equipped with "0"
position:
- Your product will stop operating
when you turn the thermostat button
to "0" (zero) position. Your product
will not start unless to you turn the
thermostat button to position "1" or
one of the other positions again.
If your thermostat is equipped with
"min" position:
- Unplug your product to stop it.
Crisper humidity control
sliders
Using the crisper humidity control
sliders
Crisper of your refrigerator is designed
specially to keep your vegetables fresh
without loosing their humidity. Cold air
circulates basically around the crisper
and the amount of the cold air passing
through the crisper is controlled by the
sliders on the front side of the crisper
cover.
You can adjust the humidity control
sliders to a suitable position according
to the humidity and cooling condition
of your food in the crisper.
If you want your food in the crisper
to cool more, open the holes of the
humidity control sliders and if you
want them to cool less and keep their
humidity for a longer time, close the
holes.
17
EN