Turbo Cooling Fan; Crisper Humidity Control Sliders; Making Ice - Blomberg DSM 9850 T A+ Bedienungsanleitung

Turbo Cooling Fan

"Turbo cooling fan is designed to
ensure homogenous distribution and
circulation of the cold air inside your
refrigerator. Operation time of the turbo
cooling fan may vary depending on
the properties of your product. While
the turbo fan works only with the
compressor in some products, the
control system determines its operation
time in some products in accordance
with the cooling requirement. This
situation is explained on a separate
warning and information label attached
on the refrigerator in products equipped
with turbo fans running under different
conditions than the compressor."
Crisper humidity control
sliders
Using the crisper humidity control
sliders
Crisper of your refrigerator is designed
specially to keep your vegetables fresh
without loosing their humidity. Cold air
circulates basically around the crisper
and the amount of the cold air passing
through the crisper is controlled by the
sliders on the front side of the crisper
cover.
You can adjust the humidity control
sliders to a suitable position according
to the humidity and cooling condition of
your food in the crisper.
If you want your food in the crisper
to cool more, open the holes of the
humidity control sliders and if you
want them to cool less and keep their
humidity for a longer time, close the
holes.

Making ice

Fill the ice container with water and
place it into its seat. Your ice will be
ready approximately in two hours.
You can easily remove your ice by
slightly twisting the ice container.
17
EN