Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ON
10
Amplifier output to link the satellite speaker.
9
10
POWER switch
Push it to turn ON / OFF the amplifier.
Before switching the amplifier ON, check all the connections and turn fully
counterclockwise (– ∞) the volume control
11
VDE Inlet with fuse.
100-120V~ T 6.3 A L 250V
220-240V~ T 3.15 A L 250V
Before connecting the power cord, check if the A/C Power corresponds to the voltage
indicated on the rating plate on the unit. If not, please contact your RCF dealer.
Connect the power cord only to a A/C Power socket outlet with a protective earthing
connection.
When replacing the fuse, refer to the silkscreen indications.
WARNING: the VDE Power Connector is used to disconnect the system from the power
supply network. It must be always easily accessible after the installation and during the
use of the system.
8
9
11
3
.
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
