RCF EVOX JMIX8 Bedienungsanleitung Seite 17

LOAD PRESET "XX" – PRESS ENCODER TO CONFIRM - PRESS ANY KEY TO CANCEL
Press the EDIT encoder again to load the selected preset, or press any key to cancel the
operation.
When a preset is loaded, this information will appear in a dedicated area on the LOAD
SHOW page.
SAVE SHOW page:
The SAVE SHOW page permits to save all the parameters of the mixer in a preset. Again,
the INPUT and MAIN level are excluded from the preset data, they are absolute values
and can be controlled via pot knobs only.
Select a preset location from the dedicated menu rotating the EDIT encoder, then press
the EDIT encoder; a display message will appear:
SAVE PRESET "XX" – PRESS ENCODER TO CONFIRM - PRESS ANY KEY TO CANCEL
By pressing the EDIT encoder, the preset will be stored. If the selected preset is already in
use a message will appear:
OVERWRITE PRESET "XX" – PRESS ENCODER TO CONFIRM - PRESS ANY KEY TO
CANCEL
By pressing the encoder again will store the preset, while pressing any key will cancel the
operation.
By pressing the SYSTEM button once more, the SET page is shown:
The SET page allows to access to some important mixer settings.
The boxes from top left to bottom:
17