Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
AMP page: using the AMP MODEL menu on the bottom of the display, it is possible to
select one of the 15 amp simulations by OVERLOUD
TM
:
1. DARKFACE '65
2. JAZZ C
3. ROCK'64
4. ROCK 800
5. ROCK 900
6. TOP 30
7. MODERN
8. BASSAMP
9. BASSMATE
10. MARKBASS 1
11. MARKBASS 2
12. SLO 88 CRUNCH
13. SLO 88 LEAD
14. OVERANGE 120
15. HEAVY 51
Rotate the EDIT encoder to select an AMP Simulation model.
The top line of rotary controls allows to change the parameters of the selected AMP
model: DRV (Drive), BASS (Bass frequencies), MID (Mid frequencies), TRB (Treble-High
frequencies).
The AMP ON/OFF box allows to bypass the amp simulator.
Press MFX again to access to MOD page:
MOD page: use the MOD. PRESET menu on the bottom of the page to select a
modulation program between:
1. CHORUS
2. FLANGER
3. TREMOLO
Rotate the EDIT encoder to select a modulation type.
The two rotary controls allow to change the parameters of the selected modulation
preset: DEP (Depht) from 0 to 100%, and RATE (rate) in Hz.
The MOD ON/OFF box allows to bypass the modulation module.
DLY page:
The Delay page shows three rotary controls to edit the DELAY effect: LEV (level), TIME
(Delay time) in ms, FDBK (Delay feedback). Set these parameters to create the favorite
delay effect. The DLY ON/OFF box allows to bypass the delay module.
FX button:
18
Pressing the FX button gives access to the internal effects edit page.
FX PRESET menu allows to select the FX presets:
Select a preset rotating the EDIT encoder and confirm the selection pressing it. The ON/
OFF box permits to switch the effect send (FX) on and off.
19
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
