Sage the Barista Touch SES880 Kurzanleitung Seite 9

SETTING GRIND SIZE
Selecting Your Filter Basket
Single Wall Filter Baskets
Use Single Wall filter baskets if grinding fresh
whole coffee beans.
1 CUP
Dual Wall Filter Baskets
Use Dual Wall filter baskets if using
pre-ground coffee.
1 CUP
Selecting Grind Size
In the touchscreen, select the chosen filter
basket by touching the toggle option under the
'Grind' button.
Automatic Dosing
• Touch the 'Grind' button once, or push and
release the portafilter to engage the grinding
activation switch. Then allow fresh ground coffee
to fill the portafilter.
• Grinding will automatically stop, however if
you wish to stop grinding before the cycle has
finished, push and release the portafilter.
Manual Dosing
• If you prefer to manually dose, with the portafilter
inserted in the grinding cradle, push and hold
the portafilter to engage the grinding activation
switch. Continue holding until the desired amount
of ground coffee has been dosed.
• To stop grinding, release the portafilter.
This will release the grinding activation switch
and stop the grinding function.
Tamping the Ground Coffee
• Once grinding is complete, Tamp down firmly.
• As a guide to dose, the top edge of the metal cap
on the tamper should be level with the top of the
filter basket AFTER the coffee has been tamped.
2 CUP
Trimming the Dose
The Razor
allows you to trim the puck to the right level
for a consistent extraction.
2 CUP
• Insert the Razor
basket until the shoulders of the tool rest on the
rim of the basket.
• Rotate the Razor
forth while holding the portafilter on an angle over
a knock box to trim off excess coffee grinds.
• Wipe excess coffee from the rim of the filter
basket to ensure a proper seal is achieved in the
group head.
precision dose trimming tool
™
dose trimming tool into the filter
™
dose trimming tool back and
™
EN
9