Care & Cleaning - Sage the Barista Touch SES880 Kurzanleitung

Care & Cleaning
COLOUR TOUCH SCREEN DISPLAY
Please keep the touch screen dry and clean to ensure that the machine functions properly.
REPLACING THE WATER FILTER
1 2 2
Set current month Soak Filter
(refer to p11)
The provided water filter helps prevent scale build-up in and on many of the inner functioning components.
Replacing the water filter after three months or 40L will reduce the need to descale the machine.
The limitation of 40L is based on water hardness level 4. If you are in level 2 area, you can increase
this to 60L.
NOTE
To purchase water filters visit Sage
CLEANING CYCLE
There will be a message prompt when a cleaning cycle is required. This is a back-flushing cycle
and is separate from descaling. Follow the instruction on the screen.
DESCALING
After regular use, hard water can cause mineral build up in and on many of the inner functioning
components, reducing the brewing flow, brewing temperature, power of the machine, and taste of the
espresso. Even if you used the provided water filter, we recommend you to descale if there is scale build-up
in the water tank.
Go to 'Settings' and select 'Descale cycle'. Follow the instructions on the screen.
WARNING
Do not immerse power cord, power plug or appliance in water or any other liquid. The water tank should
never be removed or completely emptied during descaling.
3 4
Assemble water Ensure parts are
filter parts connected
webpage.
®
5 6
Install filter in Install water tank
tank
EN
!
Replace filter after
90 days or after 40L
13