Fixing Malfunctions - NEFF T4.E10X Gebrauchsanleitung

Fixing malfunctions

Malfunctions are generally caused by minor faults. Before
contacting Technical assistance, ensure you have read
the following recommendations and warnings.
Display
none
EÖ + number/
p + number/
 + number/
F0/F9
F2
F4
{b
{c/{d
Do not rest hot pans on the control panel.
Malfunction Measure
The electric power supply Use other electrical appliances to check if there has been
has been interrupted. a break in the electric power supply.
The appliance has not Check that the appliance has been connected correctly
been correctly connected according to the connection drawing.
according to the
connection drawing.
Electronic system If the checks above do not remedy the malfunction,
malfunction. contact technical assistance.
Electronic system Disconnect the cooking hob from the mains. Wait a few
malfunction seconds before connecting it again.
If the indication continues, notify the technical assistance
service.
There is an internal error Disconnect the cooking hob from the mains. Wait a few
in the system seconds before connecting it again.
If the indication continues, notify the technical assistance
service.
The electronic system has Wait until the electronic system has cooled down
overheated and the sufficiently. Then press any symbol on the hob.
corresponding hotplate If the indication continues, notify the technical assistance
has been switched off service.
The electronic system has Wait until the electronic system has cooled down
overheated and all the sufficiently. Then press any symbol on the hob.
hotplates have been If the indication continues, notify the technical assistance
switched off service.
Incorrect supply voltage, Please contact the local electricity board.
outside normal operating
limits
The hotplate has Wait until the electronic system has cooled down
overheated and has sufficiently before switching the hob back on.
switched off in order to
protect the hob
33