Herunterladen Inhalt Inhalt Diese Seite drucken

Childproof Lock; Switching The Childproof Lock On And Off; Switching The Permanent Childproof Lock On And Off; Timer Function - NEFF T4.E10X Gebrauchsanleitung

Inhaltsverzeichnis

Werbung

Roasting
Joints of meat
Meat stews
Goulash
Pan-frying
Steaks, chops (plain or breaded)
Steak (3 cm thick)
Breast (2 cm thick)
Whole fish and fish fillets (without breadcrumb
coating)
Whole fish and fish fillets (breaded)
Prawns and shrimps
Frozen meals, e.g. sauté
Pancakes
Omelette
Frying** (150 g 200 g per portion in 1 2 l of oil)
Frozen food, e.g. chips, chicken nuggets
Frozen croquettes
Dumplings
Meat, e.g. chicken pieces
Fish, vegetables or mushrooms, breaded or
battered
Sweet pastries, e.g. doughnuts, battered fruit
*
Slow cook, uncovered
** Uncovered

Childproof lock

The cooktop can be protected against being accidentally
turned on to ensure that children do not switch on the
elements.
Switching the childproof lock on and
off
The hob must be switched off.
To switch on:
Touch the F symbol for approx. 4 seconds. The lamp
next to theF symbol lights up for 10 seconds. The hob
is locked.
To switch off:
Touch the F symbol for approx. 4 seconds. The hob is
unlocked.
Switching the permanent childproof
lock on and off

Switching the permanent childproof lock on and off

See the section on Basic settings".
Switching the hob on:
Press the F until the beep sounds and the
goes out. The permanent childproof lock is deactivated.
The hob can now be used.
30

Timer function

4 5
4 5
This function can be used in two different ways:
3. 4.
to switch a hotplate off automatically
D
6 7
as a cooking timer
7 8
D
5 6

Switching a hotplate off automatically

5 6
Enter the time period for the required hotplate. The
6 7
hotplate will switch off automatically once this time has
7 8
elapsed.
6 7
6 7
It is programmed as follows
3. 4.
The hotplate must be connected.
8 9
7 8
1
Select the hotplate and heat setting required. Then
7 8
press the3symbol.
6 7
The 00 and
program function display.
6 7
The ? indicator lights up on the hotplate.
4 5
2
Press the + or - symbol for the time program
function.The basic settings are displayed.
+ symbol: 30 minutes
- symbol:10 minutes
3
Set the required time using the + or - symbol.
After a few seconds, the timer will start to count down.
The last programmed cooking time will appear on the
display.
Once the time has elapsed
The hotplate switches off once this time has elapsed. A
warning beep sounds.
When the 3 symbol is pressed, the indicators go out and
the beep stops..
Correcting the time
ress the 3 symbol until the R indicator lights up on the
required hotplate.
The cooking time can be changed using the + or -
symbols for the time program function.
Cancelling the automatic off function
Press the 3 symbol until the R indicator lights up on the
required hotplate. Then press the - symbol for the time
program function until kk is displayed.
The R indicator goes out.
Suggestions and warnings
Any cooking time can be to programmed up to 99
minutes.
After a power cut, the time program function will no
longer be activated.
Ñ
indicator
indicators light up on the time
min

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

T4.e20n

Inhaltsverzeichnis