Cleaning; Storage - Silvercrest SHMSB 300 A2 Bedienungsanleitung

5) When you have fi nished working with the
blender 0, move the speed switch 2 back
to the "0" position and disconnect the mains
plug 4 from the wall power socket.
ATTENTION! DAMAGE TO PROPERTY!
Only clean the lower part of the blender 0
►
under running water. Do not allow water to
get inside the blender 0. This could result in
damage to the appliance.
6) To clean the blender 0, remove it from the
fi xture 5 by turning it.

Cleaning

DANGER – RISK OF ELECTRIC SHOCK!
Always remove the plug 4 from the power
►
socket before cleaning the appliance!
Risk of electric shock!
NEVER submerge the hand element 6 in
water or other liquids!
WARNING! RISK OF INJURY!
Take care when cleaning the blender 0!
►
The blade is extremely sharp!
Never submerge the blender 0 completely
under water. If necessary, clean the lower
part with the blade under running water.
Otherwise, the appliance could be irrepa-
rably damaged.
SHMSB 300 A2
Only clean the hand element 6 containing the
■
motor with a damp cloth and, if necessary, with
a mild detergent.
The whisks 8 and the kneading hooks 9 can
■
be cleaned under running water or in warm
water with detergent. Dry everything well after
cleaning.
We recommend cleaning the attachments
directly after use. This removes food residue
and reduces the risk of bacterial contamination.
Clean the lower part of the blender 0 in warm
■
water with a little detergent or under running
water. Wipe the upper part with a damp cloth.
If necessary, add a little mild detergent onto
the cloth. Afterwards, wipe off with a cloth
moistened only with water to ensure that no
detergent remains on the appliance.
ATTENTION! DAMAGE TO PROPERTY!
Only clean the lower part of the blender 0
►
under running water. Do not allow water to
get inside the blender 0. This could result
in damage to the appliance.
Clean the measuring jug q in warm water
■
containing a mild detergent.

Storage

■ Store the cleaned appliance in a clean, dust-free
and dry location.
GB
IE
CY
7