Cleaning And Care; Storage - Silvercrest SSM 180 A1 Bedienungsanleitung

NOTE
► If the ingredients do not mix properly, it may
be necessary to lift up the appliance and
shake it a little. When doing so, hold the
blade holder together with the blender
jug and the base
come apart.
ATTENTION! DAMAGE TO PROPERTY!
► Do not operate the appliance for longer than
1 minute in one session. The appliance will
overheat! After using for 1 minute, allow the
appliance to cool down completely.
8) When the smoothie is ready, turn the blade
holder until the arrow on the base
to the symbol on the blade holder
remove the blade holder
blender jug .
9) Turn the blender jug
blade holder .
10) Screw the lid off the blender jug
can drink the smoothie through the drinking
opening on the lid
You can now prepare a second smoothie using
the second blender jug

Cleaning and care

DANGER – ELECTRIC SHOCK!
► Before cleaning the appliance, disconnect
the plug from the mains power socket!
Risk of electric shock!
NEVER submerse the base
other fluids!
■ It is best to clean the appliance directly after use.
This makes food residues easier to remove.
ATTENTION! DAMAGE TO PROPERTY!
► Do not use abrasive or aggressive cleaning
materials. These could damage the surface
of the appliance!
GB │ IE
■ 6 │
so that they do not
points
and
with the attached
over and unscrew the
. You
.
.
in water or
■ Wipe the base with a moist cloth. For stubborn
soiling use a mild detergent on the cloth.
Wipe off any detergent residue with a cloth
moistened with clean water.
■ Clean the blender jug
with blade and the lid
a little mild detergent. Afterwards, rinse all parts
with clean water so that no detergent residues
remain.
NOTE
If you clean the appliance directly after use, you
will usually achieve sufficiently hygienic cleaning
results for the blender jug
holder by using the following alternatives:
► Fill the blender jug
and add a few drops of mild detergent.
► Attach the blade holder
onto the base .
► Press the start button
that the blade
► Afterwards, rinse the blender jug
blade holder with plenty of clear water
so that all detergent residues are removed.
■ After cleaning, dry all parts thoroughly.
NOTE
► You can also clean the lid
jug and the blade holder
dishwasher. Place the parts, where possible,
in the upper basket and ensure that none of
the parts can get stuck. Otherwise they could
become deformed.

Storage

■ Store the cleaned appliance in a clean, dust-free
and dry location.
, the blade holder
in warm water with
and the blade
with 400 ml of water
and screw both
a few times so
ploughs through the water.
and the
, the blender
in your
SSM 180 A1