Proper Use; Technical Data; Before Starting The Equipment - FLORABEST FBLB 33 A1 Betriebsanleitung

4. Proper use

This equipment is designed for cleaning walk-
ways, drives and other paths. Any other use, e.g.
infl ating objects, is not permitted.
The equipment may be used only for its intended
purpose. Any other use is deemed to be a case of
misuse. The user/operator and not the manufactu-
rer will be liable for any damage or injuries of any
kind resulting from such misuse.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or indust-
rial businesses or for equivalent purposes.

5. Technical data

Engine type ............... 2-stroke engine; air-cooled
Engine power (max.) ..................0.9 kW/ 1.22 hp
Displacement ............................................... 33 ccm
Max. engine speed ..............................8500 min
Ignition ...................................................... Electronic
Weight (with empty tank) .............................6.3 kg
Tank capacity .............................................. 650 ml
Spark plug .................................................... RCJ6Y
Maximum air speed ...............................250 km/h
Sound and vibration
L sound pressure level ........................... 97 dB(A)
pA
K uncertainty ............................................. 1.5 dB
pA
L sound power level ........................... 1 1 1 dB(A)
WA
K uncertainty ............................................ 1.5 dB
WA
Wear ear-muffs.
The impact of noise can cause damage to hea-
ring.
Operation
Vibration emission value a
K uncertainty = 1.5 m/s
Anleitung_3436062_LB3.indb 10 Anleitung_3436062_LB3.indb 10
GB/IE
-1
= 3.87 m/s 2
h
2
- 10 -
Sound and vibration values were measured in
accordance with 2000/14/EC.
Sound and vibration values were measured at the
highest speed.
Keep the noise emissions and vibrations
to a minimum.
•
Only use appliances which are in perfect
working order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appli-
ance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
6. Before starting the
equipment
6.1 Fitting the blower tube (Fig. 2-3)
The equipment must be assembled as follows be-
fore it is put into operation.
•
Before the equipment is used for the first time,
the cardboard transport guard must be remo-
ved as shown in Figure 2.
•
Push the flexible blower hose (Fig. 2a/ Item
12) over the connection on the engine unit
and tighten the hose clip (Fig. 2a/Item A).
•
Now push the handle (Fig. 2b/Item 1) over
the top blower tube (Fig. 2b/Item. 13).
•
Align the handle (Fig. 2c/Item 1) and the
stop (Fig. 2c/Item B) as shown in Figure 2c
and screw the handle tight.
•
Move the flexible ring (Fig. 2c/Item C) into
center position so that its distance from the
stop B is the same when rotated to the left and
to the right.
•
Now push the top blower tube (Fig. 2c/ Item
13) into the flexible blower hose (Fig. 2c/
Item 12) and secure with the hose clip (Fig.
2c/Item D).
•
Use the long clip (Fig. 3/Item E) to secure the
cable conduit to the flexible blower hose (Fig.
3/Item 12).
01.06.12 12:53 01.06.12 12:53