General Safety Instructions - Bosch sensixx B10L Gebrauchsanleitung

en
This appliance has been designed exclusively
for domestic use and must not be used for
industrial purposes.
Carefully read through
instructions for the appliance and safeguard
them for future reference.
General safety instructions
• Before plugging the appliance into the mains,
check that the voltage corresponds to that stated
on the characteristics plate. This appliance must
be connected to an earthed socket. If using an
extension cable, make sure that it has a 16 A
bipolar socket with an earth connection.
• This appliance must only be used for the
purposes for which it was designed, i.e. as an
iron. Any other use will be considered improper
and consequently dangerous. The manufacturer
will not be held responsible for any damage
arising from misuse or improper use.
• The electrical plug must not be removed from the
socket by tugging on the cable.
• Do not leave the appliance exposed to weather
conditions (rain, sun, frost, etc.).
• Do not leave the iron unattended while it is
plugged in.
• Unplug the appliance from the mains supply
immediately if any fault is suspected, and after
each use always.
• The mains cable on this appliance must not
be replaced by the user. If the cable becomes
damaged or needs to be replaced, this must
only be done at an authorised Technical Service
Centre.
• Never immerse the iron or steam tank in water or
any other liquid.
• The appliance must never be placed under the
tap to fill it with water.
• Remove the plug from the socket before filling
the appliance with water or before pouring out
the remaining water after use.
• Keep the appliance out of children's reach.
• This appliance is not intended to be used
by persons (including children) with reduced
physical, sensory or mental capacities, or lack
of experience and knowledge, unless they have
been given supervision or instruction.
• Children should be supervised to ensure that
they do not play with the appliance.
• If the safety fuse fitted in the appliance blows
the appliance will be rendered inoperative. To
restore normal operation the appliance will have
10
to be taken to an authorised Technical Service
Centre.
• Never aim the steam at people or animals.
the operating
• The appliance must be used and placed on a
stable surface. When the iron is placed on its
support (2), make sure that the surface on which
the support stands is stable.
• Do not use the iron if it has been dropped, shows
visible signs of damage or if it is leaking water.
It will have to be checked by an authorised
technical service centre before it can be used
again.
• Boiler´s cap must not be opened during use.
Important :
• This appliance reaches high temperatures and
produces steam during use, this could cause
scalds or burns in case of improper use.
• The steam hose, base station and in particular
the iron can get hot when used
• Do not allow the cord to come into contact with
the soleplate when it is hot.
Description
1. Boiler´s cap
2. Removable iron pad
3. Mains cable and hose storage compartment
4. Mains cable
5. Steam hose
6. "Steam ready" pilot light
7. "Refill boiler" pilot light
8. Variable steam control (depending on the
9. Illuminated main power button (0/I)
10. Housing with internal steam generator
11. Temperature control knob
12. Steam release button
13. Iron pilot light
14. Soleplate
15. Steam button lock (depending on the model)
16. Filling funnel
17. Carrying handles
Preparations (A)
1. Remove any label or protective covering from the
soleplate.
2. Place the appliance horizontally on a solid, stable
surface. You may remove the iron pad (2) from
model)