Pole Pruner Warnings - FLORABEST FALH 40-Li A1 Originalbetriebsanleitung

Power tool use and care
Do not force the power tool. Use
1.
the correct power tool for your
application. The correct power tool will do
the job better and safer at the rate for which it
was designed.
Do not use the power tool if the
2.
switch does not turn it on and off. Any
power tool that cannot be controlled with the
switch is dangerous and must be repaired.
Disconnect the plug from the power
3.
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories,
or storing power tools. Such preventive
safety measures reduce the risk of starting the
power tool accidentally.
Store idle power tools out of the
4.
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are
dangerous in the hands of untrained users.
Maintain power tools. Check for
5.
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by poorly
maintained power tools.
Keep cutting tools sharp and clean.
6.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
Use the power tool, accessories
7.
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous situation.
Battery tool use and care
Recharge only with the charger
1.
specified by the manufacturer. A
charger that is suitable for one type of battery
pack may create a risk of fire when used with
another battery pack.
Use power tools only with
2.
specifically designated battery
packs. Use of any other battery packs may
create a risk of injury and fire.
10 GB
When battery pack is not in use,
3.
keep it away from other metal
objects, like paper clips, coins, keys,
nails, screws or other small metal
objects, that can make a connection
from one terminal to another. Shorting
the battery terminals together may cause
burns or a fire.
Under abusive conditions, liquid
4.
may be ejected from the battery;
avoid contact. If contact accidentally
occurs, flush with water. If liquid
contacts eyes, additionally seek
medical help. Liquid ejected from the
battery may cause irritation or burns.
Service
Have your power tool serviced by
1.
a qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.

Pole pruner warnings

Q
Interrupt your work when you feel
1.
tired or exhausted. Make regular
breaks to regenerate. A moment of
inattention while operating the product may
result in serious personal injury.
Keep all parts of the body away
2.
from the saw chain. Do not remove
cut material or hold material to
be cut when saw chain is moving.
Make sure the switch is off when
clearing jammed material. A moment
of inattention while operating the product
may result in serious personal injury.
Hold the product by insulated
3.
gripping surfaces only, because
the saw chain may contact hidden
wiring. Saw chains contacting a "live" wire
may make exposed metal parts of the product
"live" and could give the operator an electric
shock.
Keep all parts of the body away
4.
from the saw chain when the
product is operating. Before you
start the product, make sure the saw
chain is not contacting anything.
A moment of inattention while operating
products may cause entanglement of your
clothing or body with the saw chain.