Vibration And Noise Reduction; Behaviour In Emergency Situations; Residual Risks - FLORABEST FALH 40-Li A1 Originalbetriebsanleitung

Do not overreach. This helps prevent
2.
unintended tip contact and enables better
control of the product in unexpected
situations.
Only use replacement guide bars
3.
and saw chains specified by the
manufacturer. Incorrect replacement
guide bars and saw chains may cause chain
breakage and / or kickback.
Follow the manufacturer's
4.
sharpening and maintenance
instructions for the product. Decreasing
the depth gauge height can lead to increased
kickback.

Vibration and noise reduction

Q
To reduce the impact of noise and vibration
emission, limit the time of operation, use low-
vibration and low-noise operating modes as well
as wear personal protective equipment.
Take the following points into account to minimise
the vibration and noise exposure risks:
Only use the product as intended by its
¢
design and these instructions.
Ensure that the product is in good condition
¢
and well maintained.
Use correct attachments for the product and
¢
ensure they are in good condition.
Keep tight grip on the handles / grip
¢
surfaces.
Maintain this product in accordance with
¢
these instructions and keep it well lubricated
(where appropriate).
Plan your work schedule to spread any high
¢
vibration tool use across a longer period of
time.
WARNING!
Overexposure to vibration can lead to
u
circulatory damage or nerve damage in
people who have impaired circulation.
Contact your doctor if you experience
symptoms of overexposure to vibration. These
symptoms include numbness, loss of feeling,
tingling, pricking, pain, loss of strength,
changes in skin colour or condition. These
symptoms normally appear in the fingers,
hands or wrists!
12 GB
Behaviour in emergency
Q
situations
Familiarise yourself with the use of this product by
means of this instruction manual. Memorise the
safety warnings and follow them to the letter. This
will help to prevent risks and hazards.
Always be alert when using this product, so
¢
that you can recognise and handle risks early.
Fast intervention can prevent serious injury
and damage to property.
Switch the product off and remove the battery
¢
pack if there are malfunctions. Have the
product checked by a qualified professional
and repaired, if necessary, before you
operate it again.

Residual risks

Q
Even if you are operating this product in
accordance with all the safety requirements,
potential risks of injury and damage remain. The
following dangers can arise in connection with the
structure and design of this product:
Health defects resulting from vibration
¢
emission if the product is being used over
long periods of time or not adequately
managed and properly maintained.
Injuries and damage to property due to
¢
broken cutting attachments or the sudden
impact of hidden objects during use.
Danger of injury or property damage caused
¢
by flying objects.
WARNING!
This product produces an electromagnetic
u
field during operation! This field may under
some circumstances interfere with active or
passive medical implants! To reduce the risk
of serious or fatal injury, we recommend
persons with medical implants to consult their
doctor and the medical implant manufacturer
before operating this product!