The Tahoma Unit In Detail; Front Panel - SOMFY TaHoma Installationsanleitung

8) The Ethernet interface must never be plugged directly into a telephone socket. The Ethernet
interface is designed for connection to communication terminals such as modems, switches, hubs,
etc. only.
3. REQUIREMENTS
1) The installer must have an account on the Somfy professional web site (***). Installers who do not
have an account with the site must apply for one prior to commissioning.
2) The PIN number of the TaHoma
DI¿[HG WR WKH XQGHUVLGH RI WKH 7D+RPD
3) The installation must have an Internet connection with an ADSL modem (router and DHCP
functions activated) equipped with an Ethernet port.
If the ADSL modem only has one Ethernet port, equipment such as an Ethernet router can be
used to connect several devices to the modem.
4) The installation must include electrical devices incorporating io-homecontrol
shutters, garage doors, skylights, blinds, lights, etc.) with the same security key, together with an
®
io-homecontrol two-way remote control (Telis Composio io, Impresario Chronis io, Telis 1 io, Easy
Sun io, etc.).
TaHoma ® LV DOVR FRPSDWLEOH ZLWK VSHFL¿F 576 5DGLR 7HFKQRORJ\ 6RPI\ GHYLFHV 3OHDVH VHH
the Somfy web site for a list of compatible RTS devices.
To add an RTS gate purchased at a large DIY outlet to TaHoma
Freevia, LS430, LS420, SGS), a special repeater remote control must be used (to be ordered
before installation).
4. CONTENTS
®
TaHoma unit
a
b
Ethernet cable
c
Mains adapter
5. THE TAHOMA

5.1. Front panel

Mode change button corresponding to the LED colour
d
described in the paragraph below. Each time this button
is pressed, the unit switches to the next mode. The
mode can also be changed from the TaHoma interface.
LED showing which mode the TaHoma
e
‡ Green LED: everything is activated. Control, scenario
creation, status reporting, etc. are authorised.
7KH VFHQDULRV VFKHGXOHG LQ 0< :((. DQG 0<
6&(1$5,26 ZLOO VWDUW DW WKH VHW WLPHV
‡ Orange LED: control, scenario creation, status reporting, etc. are authorised. One of the
automatic devices is deactivated.
‡ Fixed red LED: control, scenario creation, status reporting, etc. are blocked. Only the automatic
devices are active.
‡ Flashing red LED: control, scenario creation, status reporting, etc. and the automatic devices
are blocked.
Copyright © 2010-2013 Somfy SAS. All rights reserved.
®
unit must be noted down (the number can be found on a label
® unit and will be requested during activation of the unit).
1
1
1
®
UNIT IN DETAIL
® unit is in:
TaHoma
® technology (roller
® (e.g: Evolvia, Passeo, SGA,
b
a
c
d
e
f
®
3