Lionelo Liam Color Handbuch Seite 33

6. Installation and usage for the group 0+
The safety seat must be installed in a rear-facing position. The back
must be tilted to the position number 3 indicated by the blue arrow.
EN
6.1. Installation of the safety seat in a car
6.1.1. Adjust the back of the safety seat so that it is in the position
number 3 indicated by the blue arrow.
6.1.2. The safety seat should be installed in a car equipped
with 3-point seat belts.
6.1.3. First, pull the vehicle' s seat belts as much as possible.
6.1.4. Run the lap belt and the shoulder belt through the
safety seat (Picture 6.01).
6.1.5. Ensure that the vehicle's seat belt connector is prop-
erly locked in a buckle.
6.1.6. Ensure that the vehicle' s seat belts are not twisted.
6.1.7. Belt positions must be identical as shown in the
picture below, including fixing points.
Ilustracja 6.01 Picture
6.2. Secure the child in the safety seat with the
5-point safety harness.