Epson EMP-765 Installationshandbuch Seite 26

Entering Characters and Numerals
Perform the following steps to enter characters and numbers using the remote
control.
1. Move the cursor to the item to input, and press the [Enter] button. The cursor
turns green to indicate you are in input mode.
2. To enter numbers, use the numeric keypad
while holding down the [Num] button. [
Tilt the [ ] button up to select individual
characters or numbers in the following order:
A-Z → 0-9 → symbols → a-z → space.
Tilt the [ ] button down to select them in
reverse order.
To set your target character quickly, press
and hold the [
through characters.
3. To input subsequent numbers or characters,
tilt the [ ] button to the right. The first
number or character is selected and the
cursor moves to the second entry position.
4. After you have entered all the characters, press the [Enter] button to finalise the
entry. The cursor will turn yellow.
] button to rapidly advance
Remote control
]
Numeric buttons
The buttons in the box can be
used as a numeric keypad while
holding down the [Num] button.
Keep
depressed
25