Deregistering Handsets; Additional Base Stations; Selecting A Base Station - switel de103 Bedienungsanleitung

11.4.3 Deregistering handsets

A handset can only be deregistered by another handset still registered. It is not possible to com-
plete the deregistration using the handset which is to be deregistered.
zz
yz
ë
Press the C button to cancel the process.
ë
11.5

Additional base stations

The range of the handsets can be increased by using several base stations. To implement the
function, all the base stations must be connected to a telephone line connection. Depending on
the intended use, each base station can be assigned the same telephone number or each can
be assigned a different call number. Pay attention that all the base stations overlap with regard
to their range.
The handset must be registered on each base station.
Please test the range of the handset before starting up a new base station. If a handset is registe-
red on the base station and the automatic base station dialling function has been activated on the
handset (refer to Section 7.5), the handset is always automatically transferred to the next base
station.

11.5.1 Selecting a base station

y
yz
All the base stations to which the handset is already registered appear in the display.
The number of the base station currently active flashes.
ë
Or:
z AUTO 
− Multiple Handsets −
Open the SETUP menu.
Select the DEL HANDSET function and confirm.
Enter the PIN (default setting: 0000) and confirm the input
{í}
Enter the internal call number of the handset to be deregi-
stered and confirm the input. {í}
Open the REGISTER menu
Select the SELECT BASE function and confirm
Enter the internal number of the base station to which the
handset should switch and confirm the input. {í}
This option causes the handset to switch to the next base
station automatically when the connection to the current
base station is interrupted.
93