Inhaltsverzeichnis
Werbung
wenn die Kriterien zutreffen, und das Trennzeichen "=" bedeutet, dass sie ausgeführt wird, wenn die
Kriterien nicht zutreffen.
Abbildung 13-2 Menü 25.1 – Beispiel IP Routing Policy Setup
Menu 25.1 - IP Routing Policy Setup
# A
- - --------------------------------------------------------------------------
1 Y SA=1.1.1.1-1.1.1.1,DA=2.2.2.2-2.2.2.5
SP=20-25,DP=20-25,P=6,T=NM,PR=0
2 N __________________________________________________________________________
__________________________________________________________________________
3 N __________________________________________________________________________
__________________________________________________________________________
4 N __________________________________________________________________________
__________________________________________________________________________
5 N __________________________________________________________________________
__________________________________________________________________________
6 N __________________________________________________________________________
__________________________________________________________________________
Enter Policy Rule Number (1-6) to Configure:
ABKÜRZUNG
Kriterium
Aktion
Service
IP-Policy-Routing
Criteria/Action
Tabelle 13-1 IP Routing Policy Setup
BEDEUTUNG
SA
Source IP Address
SP
Source Port
DA
Destination IP Address
DP
Destination Port
P
IP layer 4 protocol number (TCP=6, UDP=17...)
T
Type of service of incoming packet
PR
Precedence of incoming packet
GW
Gateway IP address
T
Outgoing Type of service
P
Outgoing Precedence
NM
Normal
MD
Minimum Delay
MT
Maximum Throughput
MR
Maximum Reliability
Prestige 650H-17 ADSL-Router
|GW=192.168.1.1,T=MT,PR=0
13-3
Werbung
Inhaltsverzeichnis
Fehlerbehebung
