Bandwidth Management; Wireless Network Setup - ZyXEL NBG334S Handbuch

3.6 Bandwidth Management

Select Enable BM for all traffic automatically to have the NBG334S prioritize data traffic
according to the its use. For example, video streaming may have higher priority than email.
Leave unchecked if unsure. Click Next.
3.7 Setup Complete
1 Click Apply to save your changes in the next screen that appears in the wizard.
2 Click Finish in the screen below to complete the wizard setup.
3 Congratulations. Open a web browser, such as Internet Explorer, to visit your favorite
website.
If you cannot access the Internet when your computer is connected to one
of the NBG334S's LAN ports, check your connections. Then turn the
NBG334S off, wait for a few seconds and turn it back on. If this doesn't
work run the wizard again, making sure you type the information correctly.
Also, if you are using a new Internet account, contact your ISP to make
sure it is active. See Troubleshooting in the User's Guide for more
suggestions.

4 Wireless Network Setup

Use this section to add a computer to your wireless network. The computer must have a
wireless adapter installed. To add a computer to your wireless network, you need to
configure your wireless-enabled computer with the same SSID, channel and security
settings as the NBG334S. See the note from section 3.
ENGLISH
10