Inhaltsverzeichnis
Werbung
Prestige 650H-17 ADSL-Router
Menu 24.7.1 - System Maintenance - Upload System Firmware
To upload system firmware:
1. Enter "y" at the prompt below to go into debug mode.
2. Enter "atur" after "Enter Debug Mode" message.
3. Wait for "Starting XMODEM upload" message before activating
Xmodem upload on your terminal.
4. After successful firmware upload, enter "atgo" to restart the
system.
Warning: Proceeding with the upload will erase the current system
firmware.
Abbildung 11-6 Menü 24.7.1 – Upload System Firmware
11.4.2 Upload von Konfigurationsdateien
Wenn Sie sich mit Telnet im Menü 24.7.2 anmelden, sehen Sie folgende Bidlschirmausgabe:
Menu 24.7.2 - System Maintenance - Upload System Configuration File
To upload system configuration file:
1. Enter "y" at the prompt below to go into debug mode.
2. Enter "atlc" after "Enter Debug Mode" message.
3. Wait for "Starting XMODEM upload" message before activating
Xmodem upload on your terminal.
4. After successful firmware upload, enter "atgo" to restart the
system.
Warning:
1. Proceeding with the upload will erase the current
configuration file.
2. The system's console port speed (Menu 24.2.2) may change
when it is restarted; please adjust your terminal's speed
accordingly. The password may change (menu 23), also.
3. When uploading the STANDARD configuration file, the console
port speed will be reset to 9600 bps and the password to
"1234".
Abbildung 11-7 Menü 24.7.2 – System Maintenance
Um die Firmware und die Konfigurationsdatei zu übertragen, folgen Sie bitte diesen Beispielen:
11.4.3 Beispiel: Verwendung des FTP-Befehls aus dem DOS-Prompt
1.
Starten Sie den FTP-Client auf Ihrem Computer.
2.
Geben Sie "open" und die IP-Adresse Ihres Prestige ein.
11-8
Do You Wish To Proceed? (Y/N)
Do You Wish To Proceed? (Y/N)
Pflege der Firmware und Konfigurationsdatei
Werbung
Inhaltsverzeichnis
Fehlerbehebung
