Wireless Network Setup - ZyXEL NBG334W Schnellstartanleitung

2 Click Finish in the screen below to complete the wizard setup.
3 Congratulations. Open a web browser, such as Internet Explorer, to visit your favorite
website.
If you cannot access the Internet when your computer is connected to one
of the NBG334W's LAN ports, check your connections. Then turn the
NBG334W off, wait for a few seconds and turn it back on. If this doesn't
work run the wizard again, making sure you type the information correctly.
Also, if you are using a new Internet account, contact your ISP to make
sure it is active. See Troubleshooting in the User's Guide for more
suggestions.

4 Wireless Network Setup

Use this section to add a computer to your wireless network. The computer must have a
wireless adapter installed. To add a computer to your wireless network, you need to
configure your wireless-enabled computer with the same SSID, channel and security
settings as the NBG334W. See the note from section 3.
1 Open a wireless adapter utility such as the one shown below. The wireless utility on
your computer may look different from the one shown below.
ENGLISH
10