Using The Machine - BOMANN CB 740 Bedienungsanleitung

5....-05-CB 740 Buegeleisen
• Clean the ironing base with a slightly damp cloth.
GB
• Fill the water tank (8) through the filler aperture (6) with pure water (up to
degree of hardness 2). If the tap water is harder please use distilled water.
• Please use a filling container.
NOTE: Only clothes should to be ironed with this machine.
Ironing without Steam (
1. Place the iron on its stand.
2. Electrical connection
Make sure that the iron voltage (see name plate) and the line voltage match.
3. Sort out the garments according to their ironing temperatures. Start with the
lower temperatures. It is set with the thermostat (1):
• Synthetics, silk
• • Wool
• • • Cotton, linen
4. Only connect the machine to a properly installed safety socket, 230 V/50 Hz.
5. The control lamp (2) lights up. As soon as it shuts off, the set temperature is
reached. Now you can start to iron.
6. Always pull the plug out of the socket after using the iron.
Steam Ironing (
For this a high temperature is needed (cotton, linen).
Steam quantity regulator
The quantity of steam can be regulated using the steam quantity regulator (5). If the
steam quantity regulator is in the lower position, the steam is switched off.
Press the steam quantity regulator:
1x = without steam (
2x = medium steam quantity (
3x = large steam quantity (
Extra steam can be added with the steam jet function (4). Caution: the steam is
hot. Danger of scalding!
When ironing at low temperatures, make sure that you reduce the quantity of steam
or iron without steam.
Spray Function (
In order to moisten a section to be ironed press the spray button (3).
26
13.03.2003 10:07 Uhr

Using the Machine

)
(low temperature)
(medium temperature)
(high temperature)
)
)
)
)
)
Seite 26