Overview Of The Components; Using The Machine - BOMANN DB 765 CB Bedienungsanleitung

WARNING:
• While switched on or being allowed to cool down, the iron and its
mains lead must be out of the reach of children who are younger than
8 years old.
• This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and under-
stand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children
without supervision.

Overview of the Components

1 Continuously adjustable temperature regulator
2 Control lamp
3 Spray button „ " + Steam jet button „ "
4 Steam volume regulator
5 Flexible line cord entry
6 Filler opening for the water tank
7 Spray nozzle
8 Transparent water container
9 Base
10 Stainless Steel Soleplate
First Use of the Machine
• Clean the ironing base with a slightly damp cloth.
• Fill the water reservoir at the refill opening (6). Using a filling
container.
• Preferably use distilled water or clear tap water (maximum
water hardness level 2). If water is harder, used distilled
water only.
• Do not fill battery water, water from the clothes dryer and
water containing additives (such as starch, perfume,
softener or other chemicals) into the water reservoir. This
could damage the iron due to residues forming in the steam
chamber. These residues may cause impurities to the fabric
when dropping out of the holes in the soleplate.
Connected Wattage
In total the device can consume 2000 W of power. With this
connected load a separate supply line protected by a 16 A
household circuit breaker is recommended.
28
CAUTION: OVERLOAD
Do not use any extension leads or multiple sockets as this
device is too powerful.

Using the Machine


NOTE:
This device should only be used for ironing garments and
textiles!
• Remove any protective films and adhesive labels from the
stainless steel soleplate before using the appliance.
• Completely unwind the line cord.
Ironing without steam (steam jet regulator on „O")
1. Place the iron on its stand (9).
2. Turn the steam regulator (4) to „O". Push it down if neces-
sary in order to turn it.
3. Always set the temperature control (1) to „0" before connect-
ing the appliance to a power point, or before disconnecting it.
4. Sort out the garments according to their ironing temperatures.
Start with the lower temperatures. It is set with the thermostat (1):
• Synthetics, silk
• • Wool
• • • Cotton, linen
MAX
5. Electrical connection
• Make sure that the iron voltage (see name plate) and
the line voltage match.
• Only connect the machine to a properly installed safety
socket, 230 V/50 Hz.
6. The control lamp (2) lights up. As soon as it shuts off, the
set temperature is reached. Now you can start to iron.
7. Always pull the plug out of the socket after using the iron.
low temperature
medium temperature
high temperature
maximum temperature