Via Download - Samsung BD-D8200 Bedienungsanleitung

Setup
3.
When the download is complete, the Upgrade
Query window appears with three choices:
Upgrade Now, Upgrade Later, or Don't
Upgrade.
4.
If you select Upgrade Now, the product
upgrades the software, turns off, and then
turns on automatically.
5.
If you do not make a selection in one minute
or select Upgrade Later, the product stores
the new upgrade software. You can upgrade
the software later using the Via Download
function.
6.
If you select Don't Upgrade, the product
cancels the upgrade.
NOTE
✎
▪
Your product must be connected to the Internet to
use the By Internet function.
▪
The upgrade is complete when the product turns off,
and then turns on again by itself.
▪
Never turn the product off or back on manually
during the update process.
▪
Samsung Electronics shall take no legal responsibility
for product malfunction caused by an unstable
Internet connection or consumer negligence during a
software upgrade.
▪
If you want to cancel the upgrade while the upgrade
software is downloading, press the ENTER button.
By Channel
Upgrade software using the broadcasting signal.
By USB
To upgrade by USB, follow these steps:
1.
Visit www.samsung.com/bluraysupport.
2.
Download the latest USB software upgrade
zip archive to your computer.
3.
Unzip the zip archive to your computer. You
should have a single folder with the same
name as the zip file.
4.
Copy the folder to a USB flash drive.
5.
No disc should be inserted in the product,
and then insert the USB flash drive into the
USB port of the product.
6.
In the product's menu, go to Settings >
Support > Software Upgrade.
7. Select By USB.

English
NOTE
✎
▪
No disc should be inserted in the product when you
upgrade the software using the USB Host jack.
▪
When the software upgrade is done, check the
software details in the Software Upgrade menu.
▪
Do not turn off the product during the software
upgrade. It may cause the product to malfunction.
▪
Software upgrades using the USB Host jack must be
performed with a USB memory flash stick only.
By Disc
To upgrade by Disc, follow these steps:
1.
Visit www.samsung.com/bluraysupport.
2.
Download the latest disc software upgrade
zip archive to your computer.
3.
Unzip the zip archive to your computer. You
should have a single folder with the same
name as the zip file.
4.
Write the folder onto a disc. We recommend
a CD-R or DVD-R.
5.
Finalize the disc before you remove it from
your computer.
6.
Insert the disc into product.
7.
In the product's menu, go to Settings >
Support > Software Upgrade.
8. Select By Disc.
NOTE
✎
▪
When the system upgrade is done, check the
software details in the Software Upgrade menu.
▪
Do not turn off the product during the Software
Upgrade. It may cause the product malfunction.

Via Download

The Via Download option lets you upgrade
using a file the product downloaded earlier but
you decided not to install immediately or a file
downloaded by the product in Standby Mode (See
Download in Standby Mode below).
To upgrade Via Download, follow these steps:
1.
If upgrade software has been downloaded,
you will see the software version number to
the right of Via Download.
2. Select Via Download, and then press the
ENTER button.